SCTE Cable Tec Expo - Atlanta [list type="list2"] Advanced Troubleshooting in a DOCSIS 3.0 Plant Mon, November 14 – Thu, November 17 Presentation Workshop is Wednesday, November 16, 8:00am – 9:30am Repeated November 16, 11:00am - 12:00pm [/list]
John Downey and Brady Volpe will be speaking on November 2, 2011 at the Piedmont SCTE Chapter about DOCSIS 3.0 Troubleshooting, Implementation, and Planning. This is the first speaking engagement under my new consulting company The Volpe Firm, Inc., so I am truly vendor neutral and will be to field questions on any topic. Also, for those of you who will be at Cable-Tec Expo, I will be speaking on Advanced DOCSIS 3.0 Troubleshooting in the Plant. My presentation is on Wednesday November 16th and offered at the following times and locations:
The following article just released by Broadband Technology Report was written by Carl Weinschenk. A number of us from the industry contributed to Carl's piece, but it is a nice high-level summary article on the status of DOCSIS 3.0. Below you will find a snippet of the article with a link to the BTR website for the complete read. Enjoy. Rollouts Continue as DOCSIS 3.0 Matures There are just two areas of concern as the rollout of DOCSIS 3.0 continues: the upstream and the downstream. Observers seem satisfied
Cable Modems init(r1) init(r2), DOCSIS Cable Modems going offline? DOCSIS Cable Modems init(r1) init(r2) are stuck or offline! Many of us have been there before - one or more DOCSIS cable modems init(r1) init(r2) stuck in one of numerous "init()" conditions - how do we interpret these messages and what do we do? A recent reader wrote in and had just this problem. DOCSIS cable modems going offline and getting stuck in "R1" or "R2" condition, or Cable Modems init(r1) init(r2), because these are the status conditions displayed on the DOCSIS CMTS
Interesting post from fellow DOCSIS technologist on CMTS vs. EOC (Ethernet over Coax). Check out the post and his blog.
See me present at IBBS's symposium during September 13-14, 2011 or Cable-Tec Expo during November 15-17, 2011 on DOCSIS 3.0 test equipment and troubleshooting.
A recent question from a reader provided an interesting response - the answer: maximum transmit power is 52.2 dBmV for DOCSIS 3.0 cable modems under certain conditions. The answer is very simple. They were transmitting at their maximum transmit level. That being in a 16-QAM modulation with four bonded upstream channels.
This is the speak you need to know when talking DOCSIS 3.0 to any DOCSIS Engineer or specialist. It is important that you learn the full name, in many cases the acronym and also what value the particular terminology plays in a DOCSIS 3.0 network as it will likely be crucial in troubleshooting tough-to-diagnose DOCSIS impairments.
Here is a list of five applications that I have found to be extremely useful for cloud-based computing. There are many I have still not tried, but this will give you some idea of what is out there. Chromebooks are definitely worth considering as a low cost laptop.
With IPv6 on the way in a number of MSO (Multi-System Operator) networks, I have received numerous questions lately about how home devices such as routers and PCs attached to DOCSIS cable modems will get their IP addresses. Will cable operators suddenly start issuing IPv6 IP addresses to their customers? Will you as a subscriber need to upgrade your equipment to support IPv6? Or does the cable modem act as a Network Address Translation (NAT) device and hand-out IP address to each device attached to it? These are some very good questions and the answers are addressed in the DOCSIS specification as I will outline.
