The first part of this article (in CT's March 2009 issue) discussed downstream potential issues, while this one focuses on the potential issues associated with upstream deployments. In particular, this article covers the critical upstream areas that one should be aware of when getting ready to deploy or already deploying DOCSIS 3.0.
While the UCD provides the language of the DOCSIS network, the Station Maintenance messaging is the proverbial "heartbeat" of the DOCSIS network. A station maintenance session consists of a Range Request sent from a cable and a Range Response sent by the CMTS. The CMTS analyzes the signal quality of the Range Request message and sends back any necessary RF adjustments in the Range Response message. This "handshake" between every cable modem and the CMTS must occur once every 30 seconds as dictated by the DOCSIS specification.
Just as a picture is worth a thousand words, so is a complete Upstream Channel Descriptor (UCD) as seen by a cable modem. This message, sent every two seconds by the the CMTS, contains an enourmous amount of valuable information that every cable modem on a DOCSIS network needs to know in order to communicate. Often undervalued, the UCD is a virtual Hitchiker's Guide to the DOCSIS network! So without any further ado, let me show you an example of a full UCD message and then explain its contents further
