channel bonding Archives

12 10, 2009

DOCSIS 3.0 Tutorial – Introduction

Mia Colabrese2021-08-17T16:05:13-04:00October 12th, 2009|

This is the first of a new series of Tutorials focused on the Data Over Cable Service Interface Specifications (DOCSIS) version 3.0. I will make the assumption that you are familiar with the DOCSIS 1.x / 2.0 standards or have already reviewed my DOCSIS Basics Tutorial as I will be using many terms without explanation since they were previously covered. The DOCSIS 3.0 specification is an extension of the DOCSIS 1.x and 2.0 specification which dramatically increases the data throughput by adding a technology known as channel bonding to the DOCSIS downstream and upstream, adding increased security, adding support for IPv6, and substantially improving the back-office management support (MIBs, SNMP, IPDR, etc.) for DOCSIS. Each of these topics will covered in much greater detail in this DOCSIS 3.0 tutorial in multiple posts yet to come.

DOCSIS Upstream – Part II

Mia Colabrese2021-08-17T13:40:53-04:00October 7th, 2009|

This article will focus more specifically on DOCSIS 3.0 issues that will occur as you are deploying DOCSIS 3.0 or post -deployment.

DOCSIS and Cable Modems – How it works :: Upstream RF

Mia Colabrese2021-08-17T13:29:04-04:00February 5th, 2009|

Cable modems use RF (radio frequency) signals to transport data over hybrid-fiber coax (HFC) networks according to the DOCSIS® specification. This blog will discuss the finer points extracted from the DOCSIS specification related to how cable modems communicate with the headend Cable Modem Termination System (CMTS), allowing two-way transport of Ethernet traffic over a cable TV network. There are currently three major revisions and one sub-revision of the DOCSIS specification; DOCSIS 1.0, 1.1, 2.0 and 3.0. With each major revision came significant changes to the cable modem upstream specification because the upstream has typically been the bottleneck in terms of data through-put rates as will be discussed.