Impaired Service Archives

22 08, 2013

Troubleshooting Cable Networks

Mia Colabrese2020-04-02T09:57:28-04:00August 22nd, 2013|

CED Presents an Educational Webcast Troubleshooting Cable Networks - Understanding Ingress Impairments Brady Volpe will be a panelist on: "The two-way nature of cable networks is being increasingly exploited for innovative new features and services, including interactive TV applications, video conferencing, data back up, and wireless backhaul (all in addition to high speed data, VoIP, and Internet TV). Growing reliance on the return path highlights the very common problem of upstream cable ingress interferences. MSO's are planning the deployment of DOCSIS 3.1 technology to offer greater downstream/ upstream

DOCSIS Return | Dirty Fiber Optic Connectors

Mia Colabrese2012-09-24T03:14:16-04:00September 24th, 2012|

An often overlooked, but easy to resolve RF impairment are loose and/or dirty fiber optic connectors. This issue often manifests itself as an increased noise floor when viewed on a spectrum analyzer. The key to determining the difference between regular ingress and fiber connector noise is that the noise created by a loose or dirty fiber connector does not stop at the diplex filter roll-off frequency (typically 42 MHz in North America and 65 MHz Europe). The image below shows a perfect example of this type of impairment:

DOCSIS 3.0 Impaired Service

Mia Colabrese2021-08-17T16:00:00-04:00December 21st, 2011|

"Impaired Service" in which case one or more bonded upstream channels are impacted by upstream RF impairments while other bonded channels are not. Since subscriber data is striped (that is broken into pieces and spread across each upstream channel and then re-assembled by the CMTS), some of the data will be lost or have errors while other data will not. Subscribers will most likely notice an impaired condition as upstream data rates slow down due to TCP/IP transmissions and/or VoIP, gaming, teleconferencing and other real-time applications will be noticeably impacted.