symbol rate Archives

DOCSIS and Cable Modems – How it works :: UCD

Mia Colabrese2021-08-17T10:36:51-04:00February 28th, 2009|

Just as a picture is worth a thousand words, so is a complete Upstream Channel Descriptor (UCD) as seen by a cable modem. This message, sent every two seconds by the the CMTS, contains an enourmous amount of valuable information that every cable modem on a DOCSIS network needs to know in order to communicate. Often undervalued, the UCD is a virtual Hitchiker's Guide to the DOCSIS network! So without any further ado, let me show you an example of a full UCD message and then explain its contents further

DOCSIS and Cable Modems – How it works :: Upstream RF

Mia Colabrese2021-08-17T13:29:04-04:00February 5th, 2009|

Cable modems use RF (radio frequency) signals to transport data over hybrid-fiber coax (HFC) networks according to the DOCSIS® specification. This blog will discuss the finer points extracted from the DOCSIS specification related to how cable modems communicate with the headend Cable Modem Termination System (CMTS), allowing two-way transport of Ethernet traffic over a cable TV network. There are currently three major revisions and one sub-revision of the DOCSIS specification; DOCSIS 1.0, 1.1, 2.0 and 3.0. With each major revision came significant changes to the cable modem upstream specification because the upstream has typically been the bottleneck in terms of data through-put rates as will be discussed.