nanoVNA Archives

9 02, 2021

NanoVNA testing Taps, Coax, passives and more part two

Mia Colabrese2021-08-15T16:11:56-04:00February 9th, 2021|

Another power hour of cable with Brady Volpe and John Downey CMTS Technical Leader at Cisco, show real world examples of testing Coax, Taps and other passives. The discussion is on all things DOCSIS. NanoVNA (Vector Network Analyzer) testing: General intro Test equipment RF basics Test One Diplex filter explained active equipment has a diplex filter It enables the plant to be upstream and downstream capable 75 Ohm world Cross over Cold solder joints, fingers touching surface mount components issues with diplex filters The higher the split

NanoVNA testing Taps, Coax, passives and more part one

Mia Colabrese2021-08-15T16:12:51-04:00January 27th, 2021|

Another power hour of cable with Brady Volpe and John Downey CMTS Technical Leader at Cisco, show real world examples of testing Coax, Taps and other passives. The discussion is on all things DOCSIS. NanoVNA (Vector Network Analyzer) testing: General intro Test equipment Test for bad cable, passives and amps Test return loss, insertion loss, etc Why is it important to terminate Question of event error log Loss connectors impact return loss nanoVNA and VNA explained MainLine Tap You can see the entire cable spectrum Return Loss

NanoVNA Calibration to 75 Ohm for CATV

brady2022-07-04T19:38:55-04:00January 7th, 2021|

NanoVNA Calibration for CATV 75 Ohm This article focuses on calibration of the NanoVNA to a 75 ohm environment. There's a lot of talk about the NanoVNA with calibration, the NanoVNA come's standard with 50 ohm SMA connectors on it, but for CATV broadband networks we must calibrate to a 75 ohm standard and not the 50 ohm cal standards that come with the NanoVNA. There are a lot of discussions on the forms about calibrating and that's the proper way of calibrating nano VNAs for a 75